PIR Motion Sensor Switch for Room(LDFSM-D)
It is an automatic control product based on infrared technology. When human enters the switch induction range, special sensor detects infrared ray changes of human. The switch turns off automatically and loads supply power. When human moves in the induction range, the switch turns on continuously. After human leaves, the switch disconnects in delay and loads black out.
It can e applied in automatic illumination in indoor furniture, corridors, passageways and garages, etc.
Technical parameters Work power: 110-250VAC 50HZ/60Hz
Loads and power:
Filament lamp power: ≤200W/220VAC
Motor(inductance) power: ≤100W/220VAC
Static power: ≤0.02W
Detection zone:Detection range: 3-10 m adjustment
Detection angle: 110ºC(Horizontal direction)
Delayed close time: 2s-30min adjustment
Inductive environmental light strength: 5-3000LUX adjustment
Working temperature: -20ºC-+45ºC
Installation height: 1.0-1.5m
Detection range:The closer distance is, the larger angle will have.The middle position has the strongest induction.
Top view :110°
Detection range is about 10m
Settings1. Time: Delayed time can adjust 2-30sec. You can adjust it a little bit every time. otherwise, long-time delay will mistake that it can't turn off.
2. Distance: Selective installation, continuous adjustment 1-10m
3. Light sensation: clockwise adjustment; work at night
Warning:Voltage 110-220VAC; non-professionals are not allowed to install and maintain.