Kgps Aluminium Intermediate Frequency Induction Heating Melting Furnace 500kw
Send an inquiries
Product details
KGPS Aluminium Intermediate Frequency Induction Heating Melting Furnace 500kw
Introduction and application
This is the device converting three phase power current into single phase intermediate frequency current and enabling metal to produce eddy current loss through electromagnetic field induction to achieve heating and melting and is applicable to melting, heating or holding of steel, copper, aluminum, zinc, tin, nickel silver and other ferrous or nonferrous metal and alloy material, as well as heating treatment prior to forging, sintering and tube-bending forming in casting and melting industries.
Performance and features
1. Zero-voltage scanning soft start, start or stop at any time under any state without impact on power supply;
2. Speedy melting, low production cost, low pollution, conforming to environmental protection requirement;
3. Melting directly from low temperature, available for fully emptying of solution, easy change of category of melting material;
4. Flexibly adjustable power, easy and continuous smooth adjustment, easily controllable temperature, low oxidization loss, uniform metal content;
5. Furnace shell with cast aluminum ally or steel shell construction, small footprint, easy overturn body, available for selection of electric, manual, hydraulic or other overturn mode as needed;
6. Contravariant automatic regulation circuit available for matching of load impendence automatically, maintaining good operation without regulation or compensation of capacitance; power supply with fault diagnosis facilitating service.
Technical Parameters
| Model |
Rated Capacity(T)
|
Rated power (KW)
|
MF frequency(KHZ) |
Input voltage(V) |
MF voltage(V) |
Furnace voltage (V)
|
Melting rate(T/H)
|
Melting time
(MIN)
|
Power consumption (KWH/T)
|
Cooling water capacity(T/H)
|
|
CD-GWL-60
|
0.05 |
60 |
1 |
380 |
750 |
750 |
0.1 |
30 |
640 |
5 |
|
CD-GWL-100
|
0.1 |
100 |
1 |
380 |
750 |
1500 |
0.2 |
30 |
640 |
6 |
|
CD-GWL-100
|
0.15 |
100 |
1 |
380 |
750 |
1500 |
0.3 |
30 |
640 |
7 |
|
CD-GWL-160
|
0.3 |
160 |
1 |
380 |
750 |
1500 |
0.5 |
35 |
630 |
7 |
|
CD-GWL-250
|
0.5 |
250 |
1 |
380 |
750 |
1500 |
0.75 |
40 |
610 |
9 |
|
CD-GWL-350
|
0.75 |
350 |
1 |
380 |
750 |
1500 |
1 |
45 |
570 |
13 |
|
CD-GWL-500
|
1 |
500 |
0.75 |
380 |
1500 |
2500 |
1.3 |
50 |
540 |
17 |
|
CD-GWL-800
|
1.5 |
800 |
0.75 |
380/720 |
1400/2000 |
2500 |
1.8 |
50 |
520 |
22 |
|
CD-GWL-1000
|
2 |
1000 |
0.5 |
720 |
2500 |
2500 |
2.5 |
50 |
510 |
30 |
|
CD-GWL-1500
|
3 |
1500 |
0.5 |
720 |
2500 |
2500 |
4 |
50 |
500 |
34 |
1. Melting time and power consumption/ton is important to equipment power, raw material shape and weight, operator skill level and other elements;
2. Power parameters shall be subject to steel melting; lower power is required by melting of copper, aluminum, zinc or other material with low melting point; please consult Hengyang Technical Department for specific data;
3. Configuration: an intermediate frequency power supply, a capacitor cabinet, an overturn control cabinet, body, two sets of reduction boxes and supports, two water cooling cables, etc.;
The above data is of standard model. We also provide customized non-standard products with different power or melting speed.
Equipment cooling mode selection
1,Closed Cooling Tower (Recommended use)
1 Light weight and small footprint available for free relocation,available for direct use requiring no pool,pump and piping,etc.to save huge and complex water cooling facilities and saving workshop land.
2 Enclosed soft water circulating cooling to prevent piping block caused by sundries,protect electric components against scale so as to decrease fault rate of IF,HF and other heating equipment greatly and prolong service life.
3 Automatic digital display of temperature,energy efficient and environmental protection,easy installation,operation and maintenance.
2,Water tank + water pump+cooling tower
Company Profile
