Product details
Battery powered clamping tool
Clamping force: 60KN
Piston stroke: 17mm
Crimp/charge: 320 times
Crimping cycle: 3-6s
Battery voltage: 18V
Battery capacity: 2.0 Ah
Package: Steel case
Feature:
Micro computer control system-automatically detect the pressure when it is crimping, with double safety protect.
Pressure released automatically Function-the tool stop forcing the pressing and release 90% pressure when the pressure reached maximum.
The tool equipped with double piston pump which characterized by a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping,
The crimping head can be smoothly turned by 350° Around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
If a deviation from the set operation pressure or low battery charges is identified, an acoustic aignal sounds and a red display flashes.
One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A temperature sensor makes the tools stop working automatically when the temperature over 60º C under long time working, the fault signal sounds, it means the tool can't continue work until the temperature reduced to the normail.