1000M 8 Port SFP Optical Switch Industrial Fiber Optical SwitchIndustrial Fiber Optical Switch Features This is a managed Layer 2+ industrial Optical Ethernet switch with 1*1000Mbps SFP ports and 8*10/100Mbps electrical ports. It is designed to meet the various industrial application needs, and provide an industrial Ethernet network communication solution with a high performance-price ratio. with high availability and reliability, as well as the rich security features, makes it ideal for secure data transmission. It also features powerful Web-based,CLI management capabilities, wide input range dual power supply and its support for DIN rail and panel mounting for installation in the industrial environment.
"OP Ring Protection"(OPRP) is a proprietary technology of Takfly Communications Co.,Ltd., designed specifically for industrial applications, to provide a fast Ethernet ring protection and recovery within 15ms. From the management console, uses can choose any port (normal Ethernet port or trunk port) to form an Ethernet ring for faster recovery and wider bandwidth.
Industrial Fiber Optical Switch Key Features:8x10/100BaseTX Ports + 1x1000BaseFX SFP Ports
OP Ring Protection (OPRP), Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) for Ethernet ring protection and quick recovery
8K address table for auto-learned unicast addresses
4K VLAN, supports 802.1Q, port based, protocol based VLAN, as well as Generic Attribute Registration Protocol (GARP) and GARP VLAN Registration Protocol (GVRP) for flexible network planning and management
Flexible load distribution control and fail-over functionManual, static and dynamic port
Static and dynamic port aggregation for bandwidth management
Port rate limit, broadcast storm control, port mirrring, rich Quality of Service (QoS) features for data traffic control and management
Blackhole MAC address filtering, static and dynamic MAC address management for network security
Access Control Lists(ACL)Secure Shell (SSH) v2.0IGMP snoopingSNTP, SMTPSNMP V1, V2c, V3
Supports RMON statistics, history, alarm and eventWeb-based network management interface
Supports port and VLAN management
On-line firmware upgradeTwo privilege level accountsSyslog
Dual power input for high reliabilityDIN rail or panel mounting for easy installation
Industrial Fiber Optical Switch Performance:1.IEEE Protocol:802.3 10Base-T Ethernet802.3u 100Base-TX and 100Base-FX fast Ethernet802.3x
2.Flow Control and Back Pressure
3.802.1p Class of Service802.1Q VLAN Tag
4.802.3ad LACP802.1D-2004 STP802.1w Rapid STP802.1s Multiple STP802.1x
5.Non-blocking store-and-forward shared-memory switch architecture
6.MAC address:8KNetwork management: Web-based,CLI, Telnet/serial console, windows utility and SNMP management.
7.OP Ring Protection: recovery time within 15msFirmware upgrade: Web, onlinePort Configuration:RJ45 8.Port:Auto-negotiation, 10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX, on copper cable of cat5# with operation distance of less than 100 meters.
9..1000Base-FX Optical Port: SFP portSingle-mode:20, 40, 60, 80,100, 120Km,optional, depend on your SFP module
10.Multi-mode: 2, 5Km,optional, depend on your SFP module
11.Wavelength: 850nm, 1310 nm, 1550nm
12.DOWNLOAD PROGRAM Port: Based serial network management (RS-232), RJ45Alarm output interface: 13.One relay alarm output. Supportpower, port link and ring network alarmIndicator: Port link, ring fault/abnormity alarm indication 10/100/1000M Rate, run indication
Power Input options:Input Voltage: 24VDC (18V~36V DC),
Redundant double power inputInput Current: <0.24A@24VDC
Overload Current Protection
Support dual power backup
Support dual power alarm input
Connector: 6 pin terminal
Environmental Limits:40°C ~+ 80°C( Wide Temperature)
Storage Temperature:-40°C~+ 85°C(-40~185°F )
Humidity: 5%~95%
Optical Ethernet Switch Mechanical Dimension1.Dimensions: 60.5 x 118 x 140 mm
2.House Protection: IP40 protection, Aluminium Alloy
3.Installation:DIN-Rail or wall mounting
4.Weight: 760g
5.Approvals:EMI: FCC Part 15 Subpart B Class A, CISPR (EN55022) class AEMS: EN61000-4-2 6.(ESD),Level 3EN61000-4-3 (RS),Level 3EN61000-4-4 (EFT),Level 3EN61000-4-5 (Surge),Level 3EN61000-4-6 (CS),Level 3EN61000-4-8,Level 3Shock: IEC 60068-2-27Free Fall: IEC 60068-2-32Vibration: IEC 60068-2-6
Warranty:5 yearsOptical Ethernet Switch Ordering information
DFP611FP-SC20 |
1 Port 10/100M Industrial POE + 1 Port Fiber Single mode, Dual fiber, SC,20KM Support IEEE802.3af/at DC48V,Each port support Max30W |
pc |
DFP611FP-SC20-T/R |
1 Port 10/100M Industrial POE ,+ 1 Port 100M Fiber Uplink Single mode, Single fiber, SC,20KMSupport IEEE802.3af/at DC48V,Each port support Max30W |
pc |
DFP611FP-FC20-T/R |
1 Port 10/100M Industrial POE , + 1 Port Fiber Uplink Single mode, Dual fiber, FC,20KM Support IEEE802.3af/at DC48V,Each port support Max30W |
pc |
DFP611FP-SFP |
1 Port 10/100M Industrial POE ,+ 1 Port Gigabit Fiber (SFP) Uplink Support IEEE802.3af/at DC48V,Each port support Max30W |
pc |
10/100M 1Fiber + 2 Ethernet RJ45 Industrial PoE Switch |
DFP612FP-SC20 |
2 Port 10/100M Industrial POE , + 1 Port Fiber Uplink Single mode, Dual fiber, SC,20KM Support IEEE802.3af/at DC48V,Each port support Max30W |
pc |
DFP612FP-SC20-T/R |
2 Port 10/100M Industrial POE , + 1 Port 100M Fiber Uplink Single mode, Single fiber, SC,20KM Support IEEE802.3af/at DC48V,Each port support Max30W |
pc |
DFP612FP-FC20-T/R |
2 Port 10/100M Industrial POE , + 1 Port Fiber Uplink Single mode, Dual fiber, FC,20KM Support IEEE802.3af/at DC48V,Each port support Max30W |
pc |
DFP612FP-SFP |
2 Port 10/100M Industrial POE , + 1 Port Gigabit Fiber (SFP) Uplink Support IEEE802.3af/at DC48V,Each port support Max30W |
pc |
Factory picNeed more information?Please leave me an inquiry or contact me directly.