Gold Ore Processing Plant Wet Pan Mill

Gold Ore Processing Plant Wet Pan Mill :
I. Introduction to gold wet pan mill
The gold grinding machine used with gold, silver, lead, zinc, iron, molybdenum, copper, antimony mine, mine, all ball mill can be selected grind gold machine can be used. Characteristics: grind gold through the raw material mixing, rolling, crushing, rolling repeatedly reach moisture equilibrium ratio of uniform, low gas content, improve the forming rate and forming quality, grind the material through the machine molding Products with high density, good strength, no porosity ratio weight. Energy efficient, high volume of output, the product is used for iron ore process tailings recovery, not to slag the loss of effective resources can be fully utilized.

II. Technical Parameter of the wet pan mill:

III. Working Principle

1).The motor will transmit the motive power to reduction gears, under the drive of 

 reduction gears that passing through large vertical spindle, then the power cabient transfers <o:p>

to above whippletree

2).The whipple tree pulls the two roller wheels clockwise rotation,runner wheels are not only 

revoluting around the large vertical spindle but also could retating by themselves.

3).After adding into ore,the materials are under the extrusion of grinding roller weight to 

revoluting and rotating with roller wheels, when twisting that coming into being huge friction

force with grinding base,after suffering repeated extrusion,rub,grinding that be crushed 

thoroughly.

4).Under the affection of grinding roller operating, the crushed materials and the water mixed 

intensively to float on it uniformly,then passing through the overflow discharge gate that

setting up on the mill basin to discharge,after that enter into next operation procedure to 

process. 

5).Coarse mineral was sank on the bottom of grinding base, keep grinding and crushing,till the fineness could reach to standard floating on it.


IV, Photos of gold pan mill while delivery