Send inquiry
TNC SPECIFICATIONS
OUR SERVICE
1. Your inquiry will be replied within 24 hours.
2. Our delivery time is 15 days, we will contact if there are special circumstances.
3. OEM&ODM.
4. We can do the product from your drawing, sample or indicated details.
FAQ
A:Do you only have these types of products ?
XT: No, We can do other products just need to give us your product samples and data.
B :How about your product quality and piece?
XT: We have different material products, you can choose according to your needs.
C :I dont know if your product is suitable for us.
XT: Dont worry,we can give our samples to you if you need.
Electrical | |
Impedance | 50 Ohm nominal |
Frequency Range | 0-11 GHz |
VSWR | |
M39012 Straight Connectors | 1.3 max |
M39012 Right Angle Connectors | 1.35 max |
Dielectric Withstanding Voltage | 1500 VRMS |
RF Leakage | -60dB min at 3 GHz |
Insulation Resistance | 5000 MΩ min |
Contact Resistance | |
Center Contact | 1.5 mΩ |
Outer Contact | 0.2 mΩ |
Braid to Body | 0.1 mΩ |
Insertion Loss | 0.18 dB at 9 GHz |
Voltage Rating | 500 volts peak |
Environmental | |
Temperature Range | -65ºC to +165ºC |
Clamp Gaskets | Clamps |
Heat Shrink Tubing | Crimps |
Hermetic Seals | Pass helium leak test of 2 x 10-8 cc/sec |
Shock | Mil-STD-202, Method 202 |
Vibration | Mil-STD-202, Method 204 (test cond. D) |
Moisture Resistance | MIL-STD-202, Method 106 |
Corrosion | Mil-STD-202, Method 101 ( test cond. B) |
Temperature Cycling | Mil-STD-202, Method 102 (test cond. D) |
Altitude | MIL-STD-202 Method 105 (test cond. C) |
Mechanical | |
Mating | 7/16 threaded coupling |
Cable Affixment (Braid or Jacket) | |
All Crimps | Hex braid crimp |
Clamps | Screw-thread nut and braid clamp |
Cable Affixment (Center Conductor) | |
Crimps | Crimp or solder |
All Others | Solder only |
Captivated Contact | |
All Crimps | Yes |
Others | Where specified |
Cable Retention | |
Crimps | 20-100 lbs |
Clamps | 20-50 lbs |
OUR SERVICE
1. Your inquiry will be replied within 24 hours.
2. Our delivery time is 15 days, we will contact if there are special circumstances.
3. OEM&ODM.
4. We can do the product from your drawing, sample or indicated details.
FAQ
A:Do you only have these types of products ?
XT: No, We can do other products just need to give us your product samples and data.
B :How about your product quality and piece?
XT: We have different material products, you can choose according to your needs.
C :I dont know if your product is suitable for us.
XT: Dont worry,we can give our samples to you if you need.